USED PROVIDENCE / dS-201RSV OTM [06]

PROVIDENCE dS-201RSV OTM Used is in stock now!
PROVIDENCE ST type, supervised by Shozo Shimura, a set upper who is well versed in the field, and manufactured at one of the best workshops in Japan with excellent technology and quality.
Alder body with maple neck and Indian Rose fingerboard.
Equipped with original pickups in SSH layout.
Controls are volume, tone, PU selector, and coil tap switch.
It is lacquered and has a light aged finish.
The finish is light-aged, so it is difficult to judge the quality of the finish, but it is likely that there are few scratches or other marks that have appeared after the fact.
The instrument has been cleaned and adjusted after arrival, and there are no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: S10260
Country of manufacture: Japan
Case: Gig Case
Accessories: Arm
Weight: 3.31kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Scale: 648mm (25.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, PU replacement

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there may be scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, fretboard rest, or string height is indicated, it was measured by our staff at the time of setup, and may change due to differences in climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
S10260

Country of manufacture
Japan

Case
Gig Case

Accessories
Arm

Weight
3.31kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Scale
648mm (25.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, PU return