USED FENDER USA / American Professional II Precision Bass MN 3CS [06]

FENDER USA American Professional II Precision Bass MN 3CS Used in stock now!
Made in USA in 2022.
Modern specs include satin-finished neck, heel-cut joint, 9.5 radius fingerboard, and narrow-tall frets.
Alder body with maple neck and fingerboard.
The pickups are V-Mod II Split Single-Coil Precision Bass.
The bridge is a 4-Saddle HiMass Vintage, which allows you to choose between front-threaded or back-threaded strings.
The pickguard and pegs have been covered with a protective sheet and are in clean condition with minimal signs of use.
The pickguard and pegs have been cleaned and adjusted after arrival, and there are no playing problems.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: US22173940
Year of manufacture: 2022
Country of manufacture: USA
Case: Hard Case
Weight: 3.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 25.8mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial number
US22173940

Year of manufacture
2022

Country of manufacture
United States of America

Case
Hard case

Weight
3.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
25.8mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment