USED FENDER USA / American Vintage 57 Stratocaster MOD Fiesta Red [06]

FENDER USA American Vintage 57 Stratocaster MOD Fiesta Red is in stock now!
Made in USA in 1994.
This Stratocaster is a reproduction of the '57 model.
Alder body with maple neck and fingerboard.
Soft V-shape neck.
Lacquer finish.
Pickguard and assembly has been replaced.
Pickups are Seymour Duncan SSL-3 and SSL-5 x 2, and condenser and selector are made by Centralab.
There are some minor scratches, dents, and dull metal parts, but it is in clean condition for a used item.
It has been cleaned and adjusted after arrival and has no playing problems.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V072224
Year of manufacture: 1994
Country of manufacture: USA
Case: Hard Case
Weight: 3.49kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.3mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 22.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, removal of burrs, strap pin replacement

* There are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs of the item

Product rank B+: There are some scratches, but no problem in normal use.

Serial number V072224

Year of manufacture 1994

Country of manufacture USA

CaseHard case

Weight 3.49kg

No truss rod problem.

No fret remainder problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.3mm

Neck thickness near 1st fret 21.0mm

Neck thickness 22.4mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, nut groove correction, removal of burrs, strap pin replacement