Skip to product information
1 of 16

USED FENDER JAPAN / ST67-95 VWH [06]

Serial Number : MIJ P038377

[SN MIJ P038377] USED FENDER JAPAN / ST67-95 VWH [06]

Item Code: 06-2800003625860
Condition: USED
Store: [06] shinjuku

Regular price ¥145,600 JPY
Regular price Sale price ¥145,600 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
FENDER JAPAN ST67-95 VWH Used model now in stock!
Manufactured by Fujigen, 1993-1994.
A Japanese-made Stratocaster recreating the large-headstock '67 model.
Features an alder body with a maple neck and fingerboard.
Equipped with three USA-made ST-VINTAGE pickups.
There is a dent and wood wear on the 1st fret, 1st string side of the fingerboard.
Paint peeling is present on the elbow contour area and near the back panel on the body's underside.
Significant paint loss is present at the left horn strap pin mounting point.
Other minor scratches, dents, and tarnish on metal parts are present, resulting in a well-played player's condition.
Condition Grade: B - Significant scratches & wear present, but no issues for normal use.

Serial Number: MIJ P038377
Country of Manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.73kg
Truss Rod: No issues. Rod confirmed to move freely up to 60 degrees on both sides.
Fret depth: No issues. Sufficient fret height present
String Height (Low-String Side): 2.0mm above the 12th fret
String height (treble side): 1.5mm above the 12th fret
Nut width: 40.7mm
Neck Thickness Near 1st Fret: 19.4mm
Neck Thickness Near 12th Fret: 22.5mm
Scale length: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: .009-.042 set
Modifications: Switch knobs, bridge set screws, back panel screws
Repair/Maintenance: Switch knob replacement, bridge set screw replacement, back panel screw installation, fret leveling, cleaning, string replacement, truss rod adjustment, octave adjustment, string height adjustment

* As this is a used item, please be aware that there may be scratches, dents, or other imperfections not easily visible in photos or listed above.

* Any measurements listed for the truss rod, remaining fret height, or string height were taken by our staff during setup. These values may change due to environmental factors like climate and humidity.
These values are intended as a reference at the time of purchase and do not guarantee that the instrument will have the same measurements upon arrival.

* This item is a single, physical unit listed simultaneously on multiple marketplaces, including in-store displays. We strive to promptly remove sold items from listings, but updates are not always in real-time.
Should the item be sold out after your order is placed, we sincerely apologize for any inconvenience and kindly ask for your understanding.
FENDER JAPAN ST67-95 VWH 中古入荷いたしました!
1993年〜1994年 フジゲン製造。
ラージヘッドの67年仕様を再現した日本製ストラト。
アルダーボディにメイプルネック・指板の仕様。
ピックアップはUSA製のST-VINTAGEを3基搭載。
指板1フレット1弦側に打痕および木部削れがございます。
エルボーコンター部やボディ裏バックパネル付近に塗装剥がれがございます。
左側ホーンストラップピン取り付け部に大きな塗装剥がれがございます。
その他細かい擦り傷や打痕、金属パーツのくすみなどがあり使用感強めのプレイヤーズコンディションとなります。
商品ランク: B:かなり、傷&使用感はあるが、通常使用する用途において問題なし

シリアルナンバー: MIJ P038377
製造国: 日本
ケース: ソフトケース
付属品: アーム
重量: 3.73kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 問題なし充分なフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 40.7mm
ネック厚1フレット付近: 19.4mm
ネック厚12フレット付近: 22.5mm
スケール: 648mm (25.5")
RADIUS: 184mm (7.25")
セットアップ時の弦: .009-.042 set
変更箇所: スイッチノブ・ブリッジイモネジ・バックパネルビス
リペア・メンテナンス箇所: スイッチノブ、ブリッジイモネジ交換・バックパネルビス取り付け・フレットすり合わせ・クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4