USED FENDER / Classic 60s Jazz Bass USA Pickups VWH Vintage White [06]

Made in Japan in 2016.
This '62 version maximizes the character of the Jazz Bass by using an alder body, which is also used in vintage guitars, with USA pickups that extend the tonal range.
Alnico magnet polepiece mounted on a slim coil bobbin and enamel-finished coil material produce a quality vintage sound.
There is a ding with paint peeling near the body side control panel.
There is a paint chip on the 1st string side of the neck joint.
There is a paint crack on the 4th string side of the neck joint, but it does not seem to have reached the wood.
There are some other minor scratches, dents, and dull metal parts, but this guitar is still ready to be used.
It has been cleaned and adjusted after arrival, so there are no problems with playing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: JD16002724
Year of manufacture: 2016
Country of manufacture: Japan
Case: Soft case
Weight: 4.46kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.65mm
Neck thickness near 1st fret: 21.33mm
Neck thickness near 12th fret: 24.70mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD16002724

Year of manufacture2016

Country of manufacture Japan

CaseSoft case

Weight 4.46kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right

Fret remainder no problem, enough fret height

String height: 2.5mm above the 12th fret on the bass string side

String height 2.0mm above the 12th fret on the treble string side

Nut width 38.65mm

Neck thickness near the 1st fret: 21.33mm

Neck thickness near 12th fret: 24.70mm

Scale 864mm (34")

RADIUS184mm (7.25")

Strings D'Addario EXL165 / .045-.105 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment