USED FERNANDES/BURNY / MG-120X Graphic on Black Hide Model [06]

The FERNANDES MG-120X has arrived!!

This "hide" model needs no introduction. The MG-120X we’ve received faithfully reproduces the graphics hand-drawn by hide himself on the body top, headstock, and even the pickups.
It’s one of the most popular models in the entire MG series.

There is noticeable rust on the screws, as well as damage to the plating on the tailpiece and bridge. There are dents and paint chips on the tip of the headstock.
There are fine scratches across the entire body, circular scuff marks around the strap pins, and discoloration around the nut and on the binding.
The frets are set low; there are scratches and dents on the back of the neck, and there is a slight step at the scarf joint on the back of the neck. Other minor scratches and dents are also present. It has been cleaned and fully adjusted since arrival.

Condition Grade: B: Shows significant wear and signs of use, but is in good working condition for normal use

Country of Manufacture: Japan
Case: Soft case
Weight: 3.18 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (limited remaining adjustment)
Fret Wear: Defects present; replacement should be considered during the next repair
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Strings used for setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, string action adjustment, fret leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.