USED Washburn / Wing Series HAWK Custom tobacco sunburst Washburn [4.04kg / 1980]

This is a Washburn Wing Series Hawk Custom, a Japanese model that was produced from the 1970s to the 1980s.

This archtop spec Hawk was developed in the Eagle, Falcon, Hawk, and Raven grades. Special specifications include "CUSTOM" on the rod cover, a special pickguard is included and a name sticker (removed) can be seen on the back plate. It has maple/rosewood through-neck construction, ash body wings, rose fingerboard, Harmonic Lock bridge, 2-cob type pegs, and 2Vol/2Tone/3Way selector.

There is no description of the PU and the model number is unknown. The rear pickup may be non-original as there are some soldering marks. The nut and knob may have been changed as well.

There are some signs of use (color fading, scratches around the body, scuffs and scratches, picking marks, buckle marks, scratch marks, metal parts and screws are cloudy, pits, rust, etc.).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, sticker removal, and wiring modification) upon arrival, and the fret board is low enough to play with alignment, and the truss rod can be tightened or loosened up to ±60°. (The truss rod can be tightened and loosened up to ±60 degrees.

Please read carefully.
* This is a used item and only one of the actual item is available.
* Please note that there are scratches, dents, etc. due to use, which are difficult to be shown in the photos. Please understand in advance.
* In addition, because it is listed in multiple malls, there is a time lag in the sales situation and inventory situation, there is no real time.
Therefore, there is a possibility that the item has already been sold when you order.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 800295
Year of manufacture: 1980
Country of manufacture: Japan
Case: Hard Case
Weight: 4.04kg
Truss Rod: Note: I have checked the rod to 60 degrees to the left and right and it is fine (not much left)
Fretboard: With some notes, still can be cut, but the frets are low.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 1 11/16"
Scale: 25"
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, alignment, sticker removal, wiring correction

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
800295

Year of manufacture
1980

Country of manufacture
Japan

Case
Hard case

Weight
4.04kg

Truss Rod
No problem (not much left)

Fret Remaining
There is a note that it can still withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut Width
1 11/16"

Scale
25"

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, sticker removal, wiring correction