USED JACKSON / Pro Series Dinky DK Modern Ash HT6 / Baked White [3.29kg]

The Jackson Pro Series Dinky DK Modern Ash HT6 is in stock with impactful looks!

The sandblasted ash body has a different taste of baked white, with a white Jackson logo on the reverse-matching headstock. Reverse-matched headstock with white Jackson logo and black hardware.
Graphite-reinforced, strong bolt-on 3-piece construction (maple/wenge/maple) neck with 12" (304.8mm)-16" (406.4mm) compound radius ebony fingerboard with 24F jumbo frets and offset pearl dot inlays, It has a GraphTech TUSQ XL nut. Modern specs include Luminlay side dots and active Fishman Fluence Openn Core PRF-COC rear and front humbucking PUs.
With the 5-way switch in PU position 1 (rear only) or position 5 (neck only), you can take advantage of the tone control with push/pull function enabled and switch from vintage-like "Voice 1" to modern "Voice 2" in PU positions 2, 3 and 4, all feature "Voice 3" single coil tone. It is equipped with Gotoh locking tuners and a Hipshot 6 hardtail bridge.

The overall appearance of the instrument does not show much signs of use, and there are only a few scuffs on metal parts.
It has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, and the fret board is high enough, and has been checked to about 1/4 round left on the tightening side.

* This item is a used one-of-a-kind item.
* This is a used item, and there are scratches, dents, and other minor blemishes due to use that may not show up in the photos. Please understand this in advance.

Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: KWJ2300896
Year of manufacture: 2023
Country of manufacture: Korea
Case: Soft Case
Accessories: Dunlop strap lock, wrench
Weight: 3.29kg
Truss Rod: 1/4 turn left on the tightening side
Fretboard: No problem, sufficient fretboard height
String height on bass side: 1.9mm above 12th fret
String height on treble string side: 1.4mm above 12th fret
Nut width: 1.6875" (42.86 mm)
SCALE: 25.5" (64.77 cm)
RADIUS: 12"-16" Compound Radius (304.8 mm to 406.4 mm)
Strings at setup: .009-.042 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
KWJ2300896

Year of manufacture
2023

Country of manufacture
South Korea

Case
Soft case

Accessories
Dunlop strap lock, wrench

Weight
3.29kg

Truss Rod
About 1/4 round left on the tightening side

Fret remaining
No problem, sufficient fret height

String Height Low String Side
1.9mm above the 12th fret

String height on treble string side
1.4mm above the 12th fret

Nut width
1.6875" (42.86 mm)

Scale
25.5" (64.77 cm)

RADIUS
12"-16" Compound Radius (304.8 mm to 406.4 mm)

Strings for Setup
.009-.042 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment