USED Fender USA / American Vintage 62 Jazz Bass 3-Color Sunburst [2011/3.97kg]

This is a Fender USA American Vintage 62 Jazz Bass, made in 2011, which was produced with the concept of faithfully reproducing the specifications of each decade.

This is a '62 Jazz Bass with an alder body, maple neck, and slab-applied rosewood fingerboard, with 2Vol/1Tone 3-knob controls. It has inherited vintage specs down to the smallest details such as reverse winding pegs and vintage type bridge saddle.

The sound is exactly the same as the famous instruments of yesteryear. Recommended for bass players who are looking for a vintage sound.

It shows signs of use (paint damage on the body end due to a guitar stand, dents/chips on the bottom of the body, paint chips on the joint plate, minor scratches and paint chips on the body back, scratches and marks from playing, picking marks, buckle marks, fogging and pitting on metal parts and screws, etc.).

The fret board has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and removal of burrs) upon arrival, the fret board is high enough to play, and the truss rod can be tightened or loosened up to ±60°.

* The truss rod is adjustable to tighten or loosen, and the truss rod is adjustable to ±60°.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.

Product rank: B+: There are some scratches, but no problem in normal use.

Serial number: V199297
Year of manufacture: 2011
Country of manufacture: USA
Case: Hard Case
Accessories: Mute sponge
Weight: 3.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Depth: No problem, fret height is sufficient.
Nut width: 38.73mm
Neck Thickness near 1st fret: 21.07mm
Neck thickness near 12th fret: 24.79mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and de-burring.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V199297

Year of manufacture
2011

Country of manufacture
U.S.A.

Case
Hard Case

Accessories
Mute Sponge

Weight
3.97kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, sufficient fret height

Nut width
38.73mm

Neck thickness near 1st fret
21.07mm

Neck thickness near 12th fret
24.79mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, and removal of burrs