USED Fender Custom Shop / Team Built 1960 Stratocaster CC Dakota Red [3.50kg / 2013]

This is a 2013 "Closet Classic (CC)" finish TBC 60 Stratocaster.

This TBC Custom 60 Stratocaster is a team effort of experts in each section of the Fender Custom Shop, including woodworking, painting, hand-winding and assembly of pickups, and relicing. The "Closet Classic (CC)" finish is based on the concept of "vintage that hasn't been played much," as if it had been stored in a closet for years. Modest figured maple neck, original PU with yellow center lead wire, 5-way selector spec, and delta tone (center and rear Tone wiring).

It has an atmospheric look, is well-balanced at 3.50 kg, and the 5-way selector makes it an easy-to-use model.

The original weather cracks and minor scratches have been reproduced and some play scratches can be seen, but the condition is good.

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough to play well.

* The truss rod is adjustable to tighten or loosen, and the truss rod is adjustable to ±60°.
* Please note that this is a used item and there are scratches, dents, etc. from use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problems in normal use.

Serial number: R73729
Year of manufacture: 2013
Country of manufacture: USA
Case: Hard Case
Includes: Arm, manual, certificate
Weight: 3.50kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fret Depth: No problem, sufficient fret height
Nut width: 42.2mm
Neck Thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number R73729

Year of manufacture 2013

Country of manufacture USA

CaseHard case

AccessoriesArm, instruction manual, certificate

Weight 3.50kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret remainder problem, sufficient fret height

Nut width 42.2mm

Neck thickness: 20.4mm near the 1st fret

Neck thickness 24.1mm near 12th fret

Scale 648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment