USED Paul Reed Smith (PRS) / McCarty 10Top McCarty Sunburst [3.47kg/2016]

Paul Reed Smith (PRS) McCarty 10-top with ebony fingerboard, made in 2016.

The body is thicker than the Custom 24/22 with a 10-top grade maple top/mahogany back, thinner head than the Custom 24/22, pattern shaped mahogany neck, ebony veneer on the head top, white binding and bird inlays on the Ebony fingerboard with white binding and bird inlays, 58/15 Treble and 58/15 Bass PUs, tone-pull coil tap, nickel and gold hybrid hardware parts, and adjustable stop tailpiece bridge.

This model boasts high playability and a wide range of sound variations, including coil tapping, with an exquisitely balanced finish.

It shows signs of use (dents on the body edge, paint chips on the head tip, minor scratches and scuffs on the outer edge, scuffs and scuffs, picking marks, buckle marks, color fading, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment) upon arrival. The fret board is high enough for playing, and the truss rod can be adjusted to +/- 60 degrees.

* The truss rod is adjustable to ±60° in the tightening and loosening directions and is in good condition.
* This is a used item, and there are scratches, dents, etc. due to use that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 16 235777
Year of manufacture: 2016
Country of manufacture: USA
Case: Hard Case
Accessories: Wrench
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
Nut width: 43.5mm
Neck Thickness near 1st fret: 22.2mm
Neck thickness near 12th fret: 24.4mm
SCALE: 635mm (25")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
16 235777

Year of manufacture
2016

Country of Manufacture
United States of America

Case
Hard Case

Accessories
Wrench

Weight
3.47kg

Truss Rod
No problem, confirmed to 60 degrees left and right

Leftover frets
No problem, sufficient fret height

Nut width
43.5mm

Neck thickness near 1st fret
22.2mm

Neck thickness near 12th fret
24.4mm

Scale
635mm (25")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment