USED Fender Japan / TN72-85 NAT [3.24kg/1993-1994]

Fender Japan Telecaster Thinline TN72-85, made 1993-1994.

1972-style Telecaster Thinline with F-hole hollow construction Sen body, maple 1P neck, 648mm (25.5") scale/184mm (7.25") R/43.0mm nut, Bullet truss rod nut with modern logo, 3-point micro-tilt feature neck joint, and wide-range humbucker TN-HUMBUCKING.

The solid Fender-like tone and the glossy sound of the hollowbody & humbucker make this an easy-to-use instrument.

Pickguard replaced (with film still attached). There are some signs of use (dents and paint chips on the outer edge of the body, minor scratches and scratches, scuffs and scuffs, picking marks on the PU cover, buckle marks on the joint plate and body back, ring marks on the back of the neck/fingerboard edge darkening, metal parts and screws are cloudy, bits and rust, etc.). There are some exterior damages.

The fretboard has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival. The fret board is high enough to play well, and the truss rod has been checked to 60 degrees to the left and right.

* This is a used item, only one of the original is available.
* Please note that there are scratches, dents, etc. that are difficult to see in the pictures due to use. Please understand it beforehand.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: N098710
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Soft case
Weight: 3.24kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
Nut width: 41.7mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 25.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
N098710

Year of manufacture
1993-1994

Country of manufacture
Japan

Case
Soft case

Weight
3.24kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod.

Remaining frets
No problem, sufficient fret height

Nut width
41.7mm

Neck Thickness near 1st Fret
22.3mm

Neck thickness near 12th fret
25.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment