USED Gibson USA / Les Paul Standard Plus 60s Light Burst [4.20kg / 2002]

Gibson 60s Les Paul Standard Plus, made in 2002.

Released with the 50s, this Les Paul Standard features a 60s grip on the neck profile. Plus grade figured maple top, mahogany back (non-weight relief), mahogany neck, rose fretboard, PU with Burstbacker Pro 1 & 2, and at the time of sale it had a non-pickguard design so as not to hide the wood grain.

It has a 60s profile neck that is thin to the high position, a royal Burstbacker PU and the tight sound of the non-weight relief body.

The separate pickguard is missing, and the case is brown and probably the wrong year. It shows signs of use (minor scratches and scuffs on the outer surface of the body, scuffs and play marks, picking marks, buckle marks, cracks inside the knobs, fogging, bits and rust on metal parts and screws, and other exterior damage).

The fretboard has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and fret adjustment) upon arrival, and the fret board is high enough for playing.

* This is a used item, only one of the actual item is available.
* Please note that there are scratches, dents, and other blemishes that may not show up in the photos. Please understand this in advance.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: 01402608
Year of manufacture: 2002
Country of manufacture: USA
Case: Hard Case
Weight: 4.20kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 1.9mm above 12th fret
String height on treble string side: 1.4mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 25.7mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
01402608

Year of manufacture
2002

Country of manufacture
United States of America

Case
Hard Case

Weight
4.20kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
1.9mm above 12th fret

String height on treble string side
1.4mm above the 12th fret

Nut width
42.7mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
25.7mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment