Skip to product information
1 of 16

USED Fender / Made in Japan Traditional 60s Precision Bass Midnight [3.91kg / 2018]

Serial Number : JD18008708

[SN JD18008708] USED Fender / Made in Japan Traditional 60s Precision Bass Midnight [3.91kg / 2018] Fender [08]

Item Code: 08-2800003527423
Condition: USED
Store: [08] ikebukuro

Regular price ¥102,960 JPY
Regular price Sale price ¥102,960 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
inquery
inquery
QQ: 3784816402
For customers residing in Japan
Jet black matching head with gold hardware, limited quantity production model.

This is a "Made in Japan Traditional" Japanese model, Fender Made in Japan Traditional 60s Precision Bass, following the vintage style.

Basswood body, U-shaped maple neck, rose fingerboard, 4-saddle vintage bridge, and Vintage-Style Split Single-Coil Precision Bass PU.

This is a noble limited model with black color Matching Head specification and gold parts.

PU fence has been retrofitted. It shows some signs of use (scratches and play marks, picking marks on the pickguard film, fogging of metal parts and screws, and other exterior damage).

The fret board has been set up (cleaning, string change, rod adjustment, octave adjustment, string height adjustment) upon arrival, the fret board is high enough to play, and the truss rod has been checked to 60 degrees left and right to be tight.

* This is a used item, only one of the original is available.
* Please note that there are scratches, dents, etc. that are difficult to see in the pictures due to use. Please understand it beforehand.
Product rank: B+: There are some scratches, but no problem in the normal use

Serial number: JD18008708
Year of manufacture: 2018
Country of manufacture: Japan
Case: Soft case
Weight: 3.91kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
Nut width: 42.35mm
Neck thickness near 1st fret: 21.80mm
Neck thickness near 12th fret: 24093.0mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
JD18008708

Year of manufacture
2018

Country of manufacture
Japan

Case
Soft case

Weight
3.91kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Remaining frets
No problem, sufficient fret height

Nut width
42.35mm

Neck Thickness near 1st Fret
21.80mm

Neck thickness near 12th fret
24093.0mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment
漆黒のマッチングヘッドにゴールドハードウェアの組み合わせ、数量限定生産モデル。

ヴィンテージスタイルを踏襲した『Made in Japan Traditional』日本製モデル、フェンダー・メイド・イン・ジャパン・トラディショナル・60s・プレシジョンベースです。

バスウッド・ボディ、Uシェイプのメイプル・ネック、ローズ指板、4サドル式ヴィンテージブリッジ、PUはVintage-Style Split Single-Coil Precision Bassを搭載しています。

ブラックカラーのMatching Head仕様にゴールドパーツをあしらった気品漂うリミテッドモデルです。

PUフェンスを後付けしています。若干の使用感(スレや弾きキズ、ピックガードフィルムにピッキング痕、金属パーツやネジ類の曇り、等々の外観ダメージ)が見られます。

入荷時にセットアップ(クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整)済み、フレット山は演奏に問題ない高さがあり、トラスロッドは左右60°度まで確認済みにて問題ない状態(締め気味)です。

* こちらの商品は中古品の現物1点限りでございます。
* 中古品につき、使用による傷・打痕等、写真に写りにくい傷がございます。予めご了承くださいませ。
商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: JD18008708
製造年: 2018
製造国: 日本
ケース: ソフトケース
重量: 3.91kg
トラスロッド: 注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)
フレット残り: 問題なし充分なフレット高さあり
ナット幅: 42.35mm
ネック厚1フレット付近: 21.80mm
ネック厚12フレット付近: 24093.0mm
スケール: 864mm (34")
RADIUS: 241mm (9.5")
セットアップ時の弦: D'Addario EXL165 / .045-.105 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。

specs

商品ランク
B+:多少傷はあるが通常使用する用途において問題なし

12ヶ月

シリアルナンバー
JD18008708

製造年
2018

製造国
日本

ケース
ソフトケース

重量
3.91kg

トラスロッド
注意点ありロッド左右60度まで確認済みにて問題なし(残り少なめ)

フレット残り
問題なし充分なフレット高さあり

ナット幅
42.35mm

ネック厚1フレット付近
21.80mm

ネック厚12フレット付近
24093.0mm

スケール
864mm (34")

RADIUS
241mm (9.5")

セットアップ時の弦
D'Addario EXL165 / .045-.105 set

リペア・メンテナンス箇所
クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整

Payment and Shiping

Products are shipped from Japan after the order is processed, Shipping costs are calculated automatically at the checkout page when you select your destination. , Ship worldwide by Japan Post.

Founded in 1938, Ishibashi Music Corporation is one of the busiest and most respected Musical Instrument retail chains in Japan. The company is highly regarded world wide as a reliable seller of top quality secondhand items too. We have over 13 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, Hiroshima,Fukuoka and Shanghai(China). Ishibashi Music Corporation also handles large amounts of NEW, USED and VINTAGE instruments.

View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4