USED GIBSON USA / Les Paul Custom Ebony 1990 [10]

Item Rank: B: Fairly scratched & used, but no problem in normal use.
Serial number: 900905574
Year of manufacture: 1990
Country of manufacture: USA
Case: Genuine hard case included
Accessories: None
Weight: 4.55kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, enough fret height.
String Height (bass string side): 2.0mm above the 12th fret
String height (treble string side): 1.5mm above the 12th fret
Nut width: 43.33mm
Neck thickness (near 1st fret): 20.93mm
Neck thickness (near 12th fret): 24.15mm
Scale: 628mm (24.75")
RADIUS：254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Modified parts: -
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, strap pin replacement
Other: There is a binding and wood loss on the corner of the headstock on the 3rd string side. In addition, there are some paint cracks scattered all over the area, a scratch on the neck grip low position with paint damage, a scratch on the body side and back, a noticeable scratch on the neck binding along the fret board, etc. However, considering that the instrument is 35 years old from the time of production, it is in good condition. The PUs are the original specs of the time, "HB-R4 & HB-L6" of the substrate baseplate specs that existed for a moment, and they are still in solder virgin condition. The strap buttons have been replaced with recent parts.

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* The items shown in the pictures are all the items including the accessories.
* If there are any problems during the final check before shipping, we will inform you separately.

specs * We will inform you of any problems during the final check before shipment.

Item Rank
B: Fairly scratched and used, but no problem in normal use.

Serial No.
900905574

Year of manufacture
1990

Country of manufacture
U.S.A.

Case
Genuine hard case

Included accessories
None

Weight
4.55kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.33mm

Neck Thickness (near 1st fret)
20.93mm

Neck Thickness (near 12th fret)
24.15mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Modification
-Repair/Maintenance

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, strap pin replacement

Miscellaneous
There is some binding and wood loss on the corner of the headstock on the 3rd string side. In addition, there are paint cracks scattered throughout the entire area, a scratch on the neck grip low position with paint damage, a scratch on the body side and back with paint damage, a noticeable scratch on the neck binding along the fret board, etc. However, considering that the instrument is 35 years old from the time of manufacture The PUs are the original specs of the time, "HB-R4 & HB-L6" of the substrate baseplate specs that existed for a moment, and they are still in solder virgin condition. The strap buttons have been replaced with recent parts.