USED BLACK CLOUD / Black Smoker Sigma Tail Green Metallic [11]

Stratocaster by Black Cloud, a Japanese guitar brand made in Nagano, Japan.
The body is made of 2-piece alder wood, the neck is maple with rosewood fingerboard, and the bridge and pegs are made by GOTOH.
It is equipped with Black Cloud's original Kuwabara pickups, and a mini switch provides a rear pseudo-boost-like effect.
The weight is well balanced and the playability is high, making this a high quality instrument that is well suited for advanced playing techniques.

There are a few minor dents on the corners of the head and a noticeable ding on the top of the body near the bridge.
Other than that, it is in good condition with only minor scratches.
The 6th string side of the neck is bent forward, but there is no problem with the current playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Country of manufacture: Japan
Case: Non-authentic gig case
Accessories: Arm
Weight: 3.77kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.0mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Country of manufacture
Japan

Case
Non-genuine gig case

Accessories
Arm

Weight
3.77kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.0mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
24.1mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment