USED MUSIC MAN / Axis EX Trans Blue 1998 Trans Blue [12]

AXIS made in Japan is now in stock.
This model uses the same parts as the USA model and was produced in a domestic workshop designated by Ernie Ball/Musicman.
This model was made in 1998 according to the neck and body date.

The small body and asymmetrical grip neck boasts stress-free playability even for long hours, and the simple volume-only control is also attractive.
A D-Tuner is attached to the 6th string, which can be used for drop D tuning.

The alder body is laminated with beautiful quilted maple on the top, and bird's eye maple is used for the neck and fingerboard, making this guitar not only comfortable to play but also great to look at.
There are many scratches and dings scattered throughout, and the neck grip is quite dark.
The tape on the rear pickup bobbin is discolored and the arm is rough due to rust.
The lock nut and volume knob have been replaced, and the back panel is missing.
There is a ding on the fingerboard surface at the 7th fret of the 3rd string, but it does not interfere with playing.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
A SKB semi-hard case is included, but the arm needs to be removed for storage.
The compatible wrench size is 3/32", but it is required separately.
Item Rank: B: Fairly, scratches & signs of use, but no problems in normal use applications.

Serial Number: 89398
Year of manufacture: 1998
Country of manufacture: Japan
Case: Non-genuine semi-hard case
Accessories: Arm
Weight: 3.66kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 24.0mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
89398

Year of manufacture
1998

Country of manufacture
Japan

Case
Non-genuine semi-hard case

Accessories
Arm

Weight
3.66kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
21.3mm

Neck thickness near 12th fret
24.0mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment