USED Angel / Angel 3/4 Sunburst [11]

Acoustic guitars made by Ken Guitars, a guitar workshop located in Tokyo.
The design design imitates Gibson, combined with the elaborate Japanese-made craftsmanship, resulting in a high level of quality and perfection.
This guitar was a shop-ordered item at the time, and one that gives the impression that there were not many of them.
Spruce top, mahogany neck, and rosewood fingerboard.
Small 3/4 body is characteristic of this model. This model is not equipped with pickups.

There are some scratches and dings, but nothing noticeable.
The neck is in good playing condition with no noticeable abnormalities.

Serial number: 0512
Country of manufacture: Japan
Case: Hard Case
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 1.6mm above 12th fret
Nut width: 40.9mm
Neck thickness near 1st fret: 22.0mm
SCALE: 552mm (21.73")
RADIUS: 356mm (14")
Strings in setup: Galli Strings / .012-.054 set
Repair/Maintenance: Cleaning, string change, rod adjustment, string height adjustment, and rubbing

specs

Serial No.
0512

Country of manufacture
Japan

Case
Hard Case

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
1.6mm above the 12th fret

Nut width
40.9mm

Neck thickness near 1st fret
22.0mm

Scale
552mm (21.73")

RADIUS
356mm (14")

Strings for setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, string height adjustment, and alignment