USED Fender USA / 1978 Mustang Sunburst [11]

The Vintage Mustang was created in 1964 as a student model and has been used by many artists and is still loved today.
It is characterized by its small body, short scale neck, and cute looks with a large head.
The two single pickups can be controlled by an on/off switch, and the ability to phase the pickups is one of its greatest strengths.
The unique tension of the dynamic vibrato and the full mid-range tone are fascinating.

Pot date: "1377806" with the same date for both volume and tone.
Pickup date: "781016", same date for both front and rear pickups.

There are scratches, dings, scuffs, and chips throughout. Metal parts are dull and rusty.
There are many paint chips on the body, scratches on the back of the neck, scratches and chips on the fingerboard, and a crack in the center of the fingerboard from 15F to 20F.
There are scratches and dents on the head, paint chips on the tip, and overall tanning and discoloration.
There is a slight chattering at the string guide and string contact point when the first string is opened strongly.
There is a slight chatter on the pot, but we have not dared to replace it as it is believed to be original based on the date.
There is no noticeable abnormality on the neck, and there are no problems with normal use.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: S819896
Year of manufacture: 1978
Country of manufacture: USA
Case: Non-authentic soft case
Weight: 3.43kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Depth: Still good for cutting but low frets.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 23.6mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, nut adjustment

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
S819896

Year of manufacture
1978

Country of manufacture
U.S.A.

Case
Non-authentic soft case

Weight
3.43kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Remaining frets
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.0mm above 12th fret

String height on high string side
1.5mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
22.0mm

Neck thickness near 12th fret
23.6mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon adjustment, nut adjustment