USED ATELIER Z / M#245 Custom D-BRB [11]

Custom model of the popular Japanese bass, Atelier Z's most popular model M#245!
The preamp section is equipped with the BARTOLINI XTCT+MCT375 3-band-EQ from the kenken signature model BK-4 and Roman Bird. The custom coloring is also finished in the same signature model D-BRB.
Constructed with 2-piece ash body and 1-piece maple neck. Equipped with JBZ-4 pickups.
Logo protection sticker on pickguard has not been removed.
There is a small ding on the top of the body. There are some scratches and dings, but there are no particular noticeable damages.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 500519
Year of manufacture: 2016
Country of manufacture: Japan
Case: Original gig case
Accessories: Spec Sheet
Weight: 4.06kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.2mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 23.0mm
SCALE: 864mm (34")
RADIUS: 241mm (9.5")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
500519

Year of manufacture
2016

Country of manufacture
Japan

Case
Genuine gig case

Accessories
Spec Sheet

Weight
4.06kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.2mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
23.0mm

Scale
864mm (34")

RADIUS
241mm (9.5")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment