USED Ibanez / Artist AR300 1982 AV Antique Violin [11]

1982 Artist AR300.

Mahogany back/flame maple top, 3-piece maple neck and ebony fingerboard.
Two "SUPER 58" pickups, which are still used on hollowbody models, are installed, and the Tri Sound switch equipped on each pickup boasts a wide variety of sound variations.
The sound of the mahogany body is thick, but has a bright, edgy character with good grain.
The use of many original parts such as Smooth Tuner II on the pegs, Gibraltar II on the bridge, and Quick Change II on the tailpiece shows the enthusiasm of the manufacturer.
Gold hardware and multiple bindings are used, and the gorgeous inlay work on the head and fretboard are also uncompromising in terms of looks.
Paint is peeling from the pindings in some areas.
There is a noticeable peeling of paint on the body back.
There are scratches, dents, dull parts, rust, and other signs of use.
The neck is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: E824422
Year of manufacture: 1982
Country of manufacture: Japan
Case: Original hard case
Weight: 4.43kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.8mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 23.8mm
SCALE: 628mm (24.75")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, and correction of loose truss rod cover screw holes.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to the effects of climate, humidity, and other environmental factors.
We do not guarantee that these values will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
E824422

Year of manufacture
1982

Country of manufacture
Japan

Case
Genuine hard case

Weight
4.43kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.8mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
23.8mm

Scale
628mm (24.75")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, truss rod cover screw hole loosening correction