USED Washburn / N2 Nuno Bettencourt Signature Paduk Stain [11]

This is a cost-performance model of the high-end N4.
Nuno himself originally used a guitar with an N2 sticker on it before the N4 was completed, so this guitar cannot be described as a low-cost model in a single word.
The N4 and N24 have stephane joints, while the N2 has a standard bolt-on joint.
The N4 has an ebony fingerboard, while the N2 has a rose fingerboard.
The front pickup is a Washburn original and the rear pickup is a model that appears to be a Bill Lawrence L500.
There are some signs of use such as minor scratches, small dings, and scratches.
The neck has high-hanging symptoms and has been abraded, but the high frets may jam when played hard.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 3090581
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.25kg
Truss Rod: No problem (with a note that the rod has been checked up to 60 degrees to the left and right (with high spring).
Fretboard: No problem, sufficient fretboard height.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 19.6mm
Neck thickness near 12th fret: 21.4mm
SCALE: 648mm (25.5")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 3090581

CaseNon-genuine soft case

AccessoriesArm

Weight3.25kg

Truss RodCautionChecked up to 60 degrees on both sides of the rod, no problem.

Fret remainderNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 42.1mm

Neck thickness near the 1st fret: 19.6mm

Neck thickness near 12th fret: 21.4mm

Scale 648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment