USED KoAloha / KTR-0000 Tenor [11]

Tenor ukulele by KoAloha, a leading ukulele brand in Hawaii.
This one is made of Hawaiian koa wood with a large center stripe. The body is all solid Hawaiian Koa, and the neck and fingerboard are also made of Hawaiian Koa. The soundhole is decorated with ebony rosette.
Pickups are retrofitted.
There is a ding on the fingerboard edge at the 3rd fret on the 4th string side, and a chip on the root of the neck on the 4th string side. There is a ding on the tip of the head.
There are some scratches and dings.
The neck is slightly bent at the waist, but the guitar is in perfect playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Year of manufacture: 2015
Country of manufacture: USA
Case: Non-authentic hard case
Fret Height: Good, with sufficient fret height.
String height on bass side: 3.0mm above 12th fret
String Height: 3.0mm above the 12th fret
Nut width: 37.3mm
Neck thickness near 1st fret: 17.4mm
Scale: 432mm (17")
Strings in setup: D'Addario EJ65T / .028-.029 set
Repair and maintenance parts: Cleaning, string replacement, fingerboard side binding gap correction, fingerboard sticker adhesive removal, sticker mark correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Year of manufacture
2015

Country of manufacture
U.S.A.

Case
Non-genuine hard case

remaining frets
No problem, sufficient fret height

String Height Low String Side
3.0mm above 12th fret

String height on treble string side
3.0mm above the 12th fret

Nut width
37.3mm

Neck thickness near 1st fret
17.4mm

Scale
432mm (17")

Strings for setup
D'Addario EJ65T / .028-.029 set

Repair and maintenance parts
Cleaning, string replacement, fingerboard side binding gap filling, fingerboard sticker adhesive removal, sticker mark correction