USED ESP / Y-7 [11]

ESP made-to-order, reverse head 7-string model.
This one seems to be a certain artist model in mind from the body shape, natural satin finish, reverse head, Floyd Rose, controls and toggle switch.
It consists of an ash body, maple neck, and rosewood fingerboard. Both pickups are Seymour Duncan Custom, SH-5-7 in the rear and SH-1N-7 in the front, with push/push coil taps to switch between single and humbucker. It is suitable for a wide range of sound creation.
Lock pin is missing on one side.
There are some scratches on the parts, but the body and neck are in relatively clean condition with few scratches.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: T1315211/CS-0567
Year of manufacture: 2013
Country of manufacture: Japan
Case: Non-authentic gig case
Includes: Arm, Certificate of Authenticity
Weight: 4.52kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 46.3mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.0mm
SCALE: 666mm (26.2")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL120-7 / .009-.054 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number T1315211/CS-0567

Year of manufacture 2013

Country of manufacture Japan

CaseNon-genuine gig case

AccessoriesArm, Certificate

Weight 4.52kg

No truss rod problem, confirmed up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 46.3mm

Neck thickness near the 1st fret: 21.0mm

Neck thickness near 12th fret 23.0mm

SCALE666mm (26.2")

RADIUS305mm (12")

Strings D'Addario EXL120-7 / .009-.054 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment