USED Gibson USA / 1995 Les Paul Standard Wine Red [11]

In stock is a Gibson Royal Road electric guitar from the Yamano Gakki era, made in 1995.
Top is maple. Finished in burgundy, which looks plain at first glance but reveals fine grain patterns when viewed up close.
The body is made of one-piece mahogany with tight grain. It is very heavy, and the total weight of this unit is a rather heavy 4.66 kg.
The mahogany neck is 628mm scale, 22F, with a set neck joint. The fingerboard is made of slightly reddish rosewood.
Pickups have Gibson engraving and are equipped with 490R and 498T. The sound is bright and bouncy, with a classic approach and a gutsy emphasis on the middle range, with a good punch.
The bridge is believed to be original as it was made in Germany, and the pots are also from the original vintage.
This guitar has a good balance from clean to drive, and has a sound that can handle not only chord work but also lead playing. The weather checks all over the guitar give it a very nice atmosphere, and it has a feel beyond its age.
There is some lacquer discoloration on the body end and the back of the neck due to stand.
Overall, there are scratches, dings, and rust on the metal, showing signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial number: 91255520
Year of manufacture: 1995
Country of manufacture: USA
Case: Non-authentic gig case
Weight: 4.66kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 21.2mm
Neck thickness near 12th fret: 24.8mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
91255520

Year of manufacture
1995

Country of manufacture
U.S.A.

Case
Non-Genuine Gig Case

Weight
4.66kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
21.2mm

Neck thickness near 12th fret
24.8mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment