USED Kz Guitar Works / TL Trad 22 2H5 Black [11]

The Trad series is based on the concept of rethinking the tradition of electric guitars at the guitar studio in Zushi, Kanagawa Prefecture, Japan.
This guitar is based on the basic Telecaster type, but with Kz's originality.
The body and neck are made of high-quality Honduran mahogany. The body is made of three pieces, with the neck joint, bridge anchor, pickups, and other major parts mounted on the center piece, avoiding glued parts. This ensures stability and transmits consistent string vibration from the tip of the head to the back of the body.
The neck shape is slightly thick for a TL type, providing an exquisite grip. The unique 3-point neck joint "RS-Joint" and the deep joint reaching to the front pickups give the neck a powerful sound. The fingerboard is Indian rosewood.
The pickups are Kz Guitar Works original humbuckers in 2H layout. The 5-way selector has a unique arrangement: front (hum) - front (tap) - half (hum) - half (tap) - rear (hum), starting from the top. This is a practical specification that can also handle coil tap sound by only using the selector.
Hardware is made by Goto, a trusted manufacturer. The pegs are grip-locked SG381-07-CR L6 MG-T, and the bridge is a 510T-SF1 tremolo unit.
The matching head specification uses a Kz logo medal on the tip for a fresh impression. The originality that can be seen in the thorough attention to detail has been incorporated into a traditional look and feel, and this is one of the very high quality finished instruments from the look and feel to the sound and playability.
There are some scratches and dents, but nothing that stands out.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 20230388
Year of manufacture: 2023
Country of manufacture: Japan
Case: Gig Case
Accessories: Arm (left)
Weight: 4.30kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 24.2mm
SCALE: 635mm (25")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
20230388

Year of manufacture
2023

Country of manufacture
Japan

Case
Gig Case

Accessories
Arm (left)

Weight
4.30kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
22.5mm

Neck thickness near 12th fret
24.2mm

Scale
635mm (25")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment