USED Paul Reed Smith / SE Custom 24 Beveled Top Old Logo Cherry Sunburst [11]

High cost-performance model of PRS's standard model Custom24 is in stock!
The head has the old logo, which is a little bit old-fashioned! The head features the old logo, which is a little bit different from the current model.

The beautifully curved beveled top of the body gives it a high-end feel, even though it is an SE line model.
The standard configuration of mahogany back and maple top provides both a core mid-range and a clear treble.

Two original humbuckers are equipped for a wide range of pickups, from clean to high-gain. A coil tap function is also provided to bring out a sharp single-coil tone.
The guitar is in relatively clean condition with only minor scratches and some signs of use.
The tone switch pot has been replaced.
There is no noticeable abnormality on the neck, so there is no problem in playing condition.

* Arm is missing.
Item rank: B+: Some scratches, but no problems in normal use.

Serial number: M29454
Year of manufacture: 2012
Country of manufacture: Korea
Case: Genuine soft case
Accessories: * Arm missing
Weight: 3.95kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 19.1mm
Neck thickness near 12th fret: 20.5mm
SCALE: 635mm (25")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number M29454

Year of manufacture 2012

Country of manufactureSouth Korea

Case Genuine soft case

Accessories* Arm missing

Weight 3.95kg

Truss RodCautionChecked up to 60 degrees to the right and left of the rod, no problem (with a little high spring).

Fret remainder no problem, fret height is sufficient.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 42.7mm

Neck thickness near 1st fret 19.1mm

Neck thickness near 12th fret: 20.5mm

SCALE 635mm (25")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair