USED Fender Japan / ST54-770LS Mod Lipstick Red [11]

Made in 1991 and produced for only a short period of time, Fender Japan's famous ST54-770LS.
Based on a reissue of a 1954 Stratocaster, this model incorporates specs designed with the Eric Clapton model in mind, making it both rare and practical.
Fender Lace Sensor Gold pickups with a noiseless and glossy tone are equipped as standard, and the TBX tone and mid boost circuit (up to about 15dB) can be used for a wide range of applications from clean to brazen leads.
The rear pickup has been replaced with a Lace Sensor Blue for a thicker, warmer sound. This is a great custom for those who seek a thicker tone.
The color is a beautiful Lipstick Red, and the alder body combined with a V-shaped maple neck boasts a high degree of perfection in both playability and looks. This is a classic looking instrument with modern functionality, and it is a piece that is packed with the attention to detail that only a Japanese-made Fender can provide.
The lock pin has been replaced and the lock is missing.
There are some minor scratches, dents, dull metal parts, and light rust, but there are no major noticeable damages. The pickguard has a slight deformation float, and some darkening can be seen on the neck.
The neck is in good playing condition with no noticeable abnormalities.
The case has a slight mold smell. The zipper handle of the guitar compartment is missing.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: M.I.J. J028840
Year of manufacture: 1991
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm * Lock pin missing
Weight: 3.56kg
Truss Rod: No problem, rod checked to 60 degrees left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number M.I.J. J028840

Year of manufacture 1991

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm * Lock pin missing

Weight 3.56kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near 1st fret 20.9mm

Neck thickness near 12th fret 24.4mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair