USED Moon / RM-DX-134 Reggae Master Custom Black [11]

One of Moon Guitars' original "Reggae Master" shapes, circa 1990.
This guitar has a bolt-on construction neck, maple fretboard, and a head with both the PGM logo and the old logo, making it a very rare piece, but also confirming many specs from the same period as the RM-DX-134. The red color is the standard specification in the catalog, but we assume that this instrument is probably a color variation of the time, or a custom-ordered black finish specification.
The body has a woody sound with warm mahogany tone. Two P-90 type pickups with MOON logo engraved are mounted on the body for fat and tight midrange. The shape of the pickguard is also different from the current model, with a cutting that seems to be the original design of the time.
As a whole, this guitar has the high precision that is typical of Moon and the individual feel that is unique to the PGM manufacturing era.
Due to the malfunction of the CROCODILE locking pegs, they have been replaced with GOTOH SDS510-MG (locking type).
There are some paint chips on the body side. There is a scratch on the tip of the cutaway that has reached the wood.
There is a sticker mark on the left side of the front pickup. Overall, the paint is tanning.
Overall, there are scratches, dents, and rust on the metal, showing signs of use.
The truss rod is near the end of its tightening point and is currently warped. The frets have been fretted and there are currently no playability issues.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 16396
Case: Original soft case
Weight: 4.03kg
Truss Rod: No problem with the neck at the limit of the rod.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 23.3mm
SCALE: 648mm (25.5")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, control cleaning, electrical repair (pickup phase correction), peg set replacement

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
16396

Case
Genuine soft case

Weight
4.03kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
23.3mm

Scale
648mm (25.5")

RADIUS
356mm (14")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, electrical repair (pickup phase correction), peg set replacement