USED FERNANDES / FRB-80 20th Anniversary [11]

This special model was produced in 1989 in a limited edition to commemorate the 20th anniversary of Fernandes.
The "20th Anniversary" inlay on the fingerboard gives this anniversary model a strong presence.
The body is made of ash that boasts outstanding sound and response, and the neck is a combination of maple and rosewood fretboard. 24 frets cover a wide range of notes and can handle everything from slapping to high position lead playing without stress.
The pickups are EMG's active PJ style, which provide a sound with punchy bass and clear high frequency range.
This model combines the design characteristics of the anniversary model with the playability that makes it an immediate asset. It is recommended as a collectible and practical instrument that allows you to enjoy the perfection of a Japanese bass.
The volume knob has some scuffing and sound loss that may be due to age-related deterioration (not covered by warranty). (This is not covered by warranty.)
The exterior is dotted with scratches and dings, and overall shows some signs of use.
There are marks on the head where the tension pin was installed in a different position, and we have filled in the holes.
The missing position marks (3rd, 5th, 7th, 15th, 17th, and 21st frets) have been repaired afterwards.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Case: Genuine soft case
Weight: 3.55kg
Truss Rod: No problem, rod checked up to 60 degrees left and right, no problem
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, head tension pins repaired, fingerboard side burrs corrected, position marks installed (3rd, 5th, 7th, 12th, 15th, 17th, 21st frets)

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the instrument. Please note that there are scratches, dents, etc. that are difficult to see in the photos.

* If truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Case
Genuine soft case

Weight
3.55kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.5mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, filling holes in the head tension pins at different positions, fingerboard side burr correction, position mark installation (3rd, 5th, 7th, 12th, 15th, 17th, 21st frets)