USED Fender Japan / ST57-SC Order Y-051 Candy Apple Red [11]

This one is presumed to have been ordered based on the Fender Japan ST57-SC.
While its specifications are similar to those of the ST57-DSC of the same era, it uses a two-point tremolo for a unique touch and playability. There is no custom-made notation on the back of the head, but "ORDER Y-051" is engraved on the neck pocket, indicating that it is an order specification. Pickups are DiMarzio D117 HS-3 on the front and rear, and a model that appears to be ST-VINTAGE (JAPAN) on the center, allowing for a wide range of sound makeup.
The fingerboard is scalloped and painted with a urethane/satin finish by a professional contractor for a smooth and comfortable playing feel.
This is one guitarist who represents the heavy metal scene, and you can feel the face of that guitarist.
The selector and jack have been replaced due to failure. Selector YM-50S.
There is a paint chip on the 1st string side of the neck joint and a crack on the 6th string side. Overall, there are scratches, dents, and paint cracks.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: L021117
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm, arm spring, original parts
Weight: 3.47kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.8mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 22.7mm
Scale: 648mm (25.5")
Strings in setup: SIT / .009-.042 set
Modifications: Fingerboard paint, fretboard alignment, nut replacement, pickup selector/jack replacement
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard painting, fretboard alignment, nut replacement, electrical replacement, bridge imo screw removal

* Please note that this is a used instrument and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number L021117

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm, arm spring, original parts

Weight3.47kg

No truss rod problemNo truss rod problem, confirmed up to 60 degrees left and right.

No fret remainder problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.8mm

Neck thickness near 1st fret 19.8mm

Neck thickness 22.7mm near 12th fret

Scale 648mm (25.5")

Strings SIT at setup / .009-.042 set

Modified partsFingerboard paint, fretboard mortise, nut replacement, pickup selector/jack replacement

Repair/Maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard paint, fretboard adjustment, nut replacement, electrical replacement, bridge imo screw sticking removal