USED Fender Japan / TL62B-100BTX Candy Apple Red [11]

Fender Japan Bigsby equipped "TL62B-100BTX" is in stock!
Crafted in Japan, Judging from the R serial + 6 digits, we think it was made in 2004-2005.
Custom Telecaster with original Bigsby vibrato tailpiece on TL62B!
This is a higher grade model based on the 1962 specs, with binding and distinctive looks!
Alder body, 1-piece/maple neck and rosewood fingerboard.
The vintage look of a Custom Telecaster is combined with the ruggedness of a Bigsby for an outstanding presence!
The Telecaster's crisp and deep tone can be used in a wide range of situations regardless of genre!
There are many scratches, dents, and scuffs on the entire body.
There are rust and tarnish on the metal parts due to age-related deterioration.
The rear pickup mount has deteriorated and has been replaced with a spring type.
The truss rod has about 45 degrees of adjustment remaining, but the neck is almost straight, so there are no problems with playing.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: R036313
Year of manufacture: 2004-2005
Country of manufacture: Japan
Case: Original soft case
Weight: 3.94kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, rear pickup mount spring installed, 1 string threaded screw installed

* There are scratches, dents, etc. that are difficult to see in the photos or other than those listed due to the used nature of the instrument. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
R036313

Year of manufacture
2004-2005

Country of manufacture
Japan

Case
Genuine soft case

Weight
3.94kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, rear pickup mount spring installed, 1 string threaded screw installed