USED Fender Japan / TL72-500 Natural [11]

Fender Japan 1989-1990 Telecaster "TL72-500" is in stock!
Made in Japan, J serial + 6 digits.
This Telecaster was manufactured at Fujigen's factory in Japan, and is of high precision and stable quality!
This guitar is made of wood with a maple body, maple neck, and maple fretboard.
This model is a reproduction of a Telecaster from the 1970s.
Wide range of tone from sharp cutting to warm clean tones as only a Telecaster can do.
Simple yet attractive looks with a strong presence and easy playability.

There are scratches, dents, and peeling paint throughout.
Metal parts show rust, tarnish, and age-related deterioration.
Paint is peeling on the top and bottom of the body, and the entire top of the body and cutaway area have deteriorated, leaving them with a smooth texture.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MIJ J000152
Year of manufacture: 1989-1990
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.47kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
MIJ J000152

Year of manufacture
1989-1990

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.47kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
23.2mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing