USED Gibson USA / Les Paul Standard MOD Ebony [11]

Gibson USA 1996 Les Paul Standard in stock!
Maple top/mahogany back, mahogany neck and rosewood fingerboard.
Both front and rear pickups have been replaced with Gibson BurstBucker 1 on the front and BurstBucker 3 on the rear.
(With PU seals, Front - BB1, Rear - BB3)
Compared to the original 490R/498T, this guitar has a more vintage PAF-like sound, with shiny overtones on clean and a nice lead tone on drive.
Overall, there are scratches, dents, and signs of use such as age deterioration.
There are numerous scratches and dings, but considering the age, there is little major damage and it is in good condition.
There is a vertical weather check near the controls, which gives the guitar a vintage look.
There is no noticeable abnormality on the neck, so there is no problem in playing condition.

* Pegs replaced with Grover Cruson type (original parts not included).

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 91156430
Year of manufacture: 1996
Country of manufacture: USA
Case: Non-authentic gig case
Weight: 3.97kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.4mm
Neck thickness near 12th fret: 24.7mm
SCALE: 624mm (24.56")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
91156430

Year of manufacture
1996

Country of manufacture
U.S.A.

Case
Non-Genuine Gig Case

Weight
3.97kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.1mm

Neck thickness near 1st fret
20.4mm

Neck thickness near 12th fret
24.7mm

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing