USED Ibanez / AR2000 Prestige Vintage Violin [11]

Ibanez "Prestige" series 2000 "AR2000" is in stock!
It is made by Fujigen, the pride of Japan, and is believed to be made in 2000 judging from the serial number.
Short horn double cutaway mahogany body with AAA grade maple top and ivory binding.
Wood construction with maple neck and 22-fret rosewood fingerboard.
Gold hardware, Avalon inlays, Gotoh pegs, and other high-end features.

Two "Super 58 Custom" pickups, which are well known as Ibanez originals, are installed to provide both rich mid-low range and shimmering tone.
This is a truly high-end instrument that combines beautiful looks and sound.
It is in relatively clean condition for its age with only minor scratches and minor dings.
There are no noticeable abnormalities in the neck, and there are no problems with the playing condition.

The electrical system had been modified, so the original 2-volume, 2-tone, 3-way switch was used.
All of the following items have been replaced at that time.
Wiring inside the pickup cover was modified.
Front and rear volume pots, front and rear tone pots: CTS
Capacitors (front and rear): film type Selector switch and jack: SWITHCHCRAFT
All wiring materials

* Stock control knobs installed, front and rear escutcheons replaced due to damage.
Cleaned, inspected and adjusted, and in good condition for comfortable playing.
Item Rank: B+: Some scratches, but no problems in normal use applications.

Serial Number: F0045939
Year of manufacture: 2000
Country of manufacture: Japan
Case: Original soft case
Weight: 3.96kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 22.0mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair (front and rear volume pots, front and rear tone pots, capacitors (front and rear), selector switch, jack, replacement of wiring materials), control knob Installation extension processing, replacement of front and rear escutcheons

* Due to the used condition, there are scratches, dents, etc. that are difficult to see in the photos or that are not listed. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
F0045939

Year of manufacture
2000

Country of manufacture
Japan

Case
Genuine soft case

Weight
3.96kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
20.3mm

Neck thickness near 12th fret
22.0mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repairs (front and rear volume pots, front and rear tone pots, capacitors (front and rear), selector switch, jack, wiring material replacement), control knob installation and extension, front, Rear escutcheon replacement