USED Fender Japan / JB62-WAL [11]

This is one of the Dinah period Fender Japan jazz basses in walnut finish.
This special version features an ash body with walnut finish and black hardware for an intrepid look. The unique appearance, which cannot be found on the regular JB62, makes it stand out in a live setting.
The pickups on this model have been replaced with new Japanese single coils. Compared to the stock unit, the resistance is slightly higher at approximately 10k ohms, which gives a thicker and more powerful output while maintaining the vintage-style delicacy. This is an update for the real-world bassist, easy to handle in live and studio work.
There is some paint shining between the pickups on the top of the body.
Overall, there are scratches, dents, and metal rust, and the instrument shows some signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: CIJ Q007694
Year of manufacture: 2002-2004
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.35kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.2mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 23.5mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
CIJ Q007694

Year of manufacture
2002-2004

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
4.35kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.2mm

Neck thickness near 1st fret
20.0mm

Neck thickness near 12th fret
23.5mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair