USED Epiphone / Made in Japan Olympic Custom Walnut [11]

The Epiphone Olympic Custom was made in Matsumoku, Japan in the mid-1970s.
It was one of the top models in the Epiphone Japan line at the time, with a set neck construction and Epiphone Custom humbuckers, and had a powerful tone in spite of its compact size.
This model has a walnut-colored body with a Bigsby tremolo.
The maple neck, rosewood fingerboard, and solid maple body provide a clear attack and core midrange.
The warm tone and soft vibrato expression of the Bigsby are appealing.
This is one of the few Matsumoku Epiphone made in Japan from the 1970s.
There are a few scratches, line scratches, and minor scratches on the exterior, but overall, there is no noticeable damage and the guitar is in very good condition considering its age.
The neck is slightly twisted, but the frets have been fretted and are in good playing condition.
There are no playing problems, but the frets are slightly worn.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 105035
Year of manufacture: 1976-1977
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 4.27kg
Truss Rod: No problem, but I have checked the rod to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 19.8mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 105035

Year of manufacture 1976-1977

Country of manufacture Japan

CaseNon-genuine soft case

Weight 4.27kg

Truss RodCautionChecked up to 60 degrees on both sides of the rod, no problem (not much left)

Fret height: The frets are high enough.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 42.7mm

Neck thickness near 1st fret 19.8mm

Neck thickness 22.5mm near 12th fret

Scale 648mm (25.5")

RADIUS305mm (12")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair