USED YAMAHA / RG121212R Pearl White [11]

This is a high-end model of the "RGX series" Japanese-made super strat that was introduced in the late 1980's. It is one of the most advanced models in the RGX series.
This model was infused with the high craftsmanship of YAMAHA at that time.
Alder body, 5-piece maple/mahogany through neck, ebony fingerboard. Beautiful joint processing and slim shape allow smooth access to the high position.
The pickups use the HSS layout, and the three mini-switches (direct out switch, single/hum switch, and single coil noise cancel switch) allow for coil tapping and a variety of other sound-making possibilities. The neck-through construction provides long sustain, which is especially noticeable when playing lead.
The bridge is equipped with a Yamaha RM-II locking tremolo for stable tuning and smooth arm work.
The model is very carefully crafted as was typical of Japanese models of the time, and combines high performance with a high-quality tone and playing feel.
Missing arm. One of the pots has been replaced due to malfunction.
Metal parts are rusty and dull. There are other dents with some scuffs and paint cracks, but there are no major noticeable scratches.
There is no noticeable abnormality on the neck, and there are no problems with the playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: 5N13035
Case: Non-authentic soft case
Accessories: * Arm missing
Weight: 3.84kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 24.5mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, front tone pot replacement

* Please note that this is a used instrument and there are scratches, dents, etc. that may not show up in the photos or are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 5N13035

Case: non-genuine soft case

Accessories* Arm missing

Weight 3.84kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, fret height is high enough

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.5mm

Neck thickness near the 1st fret: 21.0mm

Neck thickness near 12th fret 24.5mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning, front tone pot replacement