USED Greco / EX800HR LH ORDER MADE Cherry Sunburst [11]

Greco EX800HR lefty made-to-order model.
The serial number indicates that it was probably made in 1978. The "ORDER MADE" stamp can be seen inside the cavity, so it seems to be a custom-made model from that time.
Mahogany back with flame maple top and set neck construction.
The original Maxon U-2000 pickups are equipped with rich mid-low range and good sustain.
There are very few lefty Explorer type guitars, so this is a rare model that rarely appears on the market. This is a rare model with a vintage Greco-style texture and a strong presence.
There is a paint chip on a part of the body. There is a small binding chip on the top corner of the body.
Overall, there are scratches, dents, and metal rust.
The neck is in good playing condition with no noticeable abnormalities.
The case that comes with the instrument is for right-handed players, so the instrument is currently stored upside down.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: DE0878T
Case: Non-authentic soft case (left and right side upside down)
Weight: 3.64kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 44.0mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 25.1mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number DE0878T

Case: non-genuine soft case (left and right side reversed)

Weight 3.64kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

No fret rest problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 44.0mm

Neck thickness near 1st fret 21.0mm

Neck thickness 25.1mm near 12th fret

Scale 628mm (24.75")

RADIUS305mm (12")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, control cleaning