USED Fender Japan / MG69-DP MOD Fiesta Red [11]

Artist-style modification of the Mustang based on the 1969 style.
The lightweight playability characteristic of the short scale has been retained. Two DiMarzio DP420 pickups are installed for powerful and clear tone. Sperzel locking pegs ensure stable tuning performance.
The pickguard was newly made after removing the preset section, and the controls were modified from tone to selector.
Around the same time it was released, a vocalist of a very popular Japanese band used a Mustang with similar specs, so this is a rare spec that many people are looking for.
There is some fading.
There is a crack at the neck joint. Overall, there are scratches, dents, and rust on the metal.
The neck is in good playing condition with no noticeable abnormalities.
There are stains on the underside of the case.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: T091125
Country of manufacture: Japan
Case: Soft case
Accessories: Arm
Weight: 3.72kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.5mm
Neck thickness near 1st fret: 20.3mm
Neck thickness near 12th fret: 23.4mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number T091125

Country of manufacture Japan

CaseSoft case

AccessoriesArm

Weight 3.72kg

No truss rod problemNo truss rod problem.

No fret rest problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 40.5mm

Neck thickness near 1st fret 20.3mm

Neck thickness near 12th fret 23.4mm

Scale 610mm (24")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon