USED Crews Maniac Sound / Reunion Cherry [11]

A semi-acoustic fusing quality box tone and modern playability
The "Reunion" is a semi-acoustic model by the Japanese brand Crews Maniac Sound. While based on the traditional 335 style, the "Reunion" combines a rich boxy sound with excellent response, thanks to the precision-designed body construction and solid build quality.
The 3-ply maple top and back with center block delivers rich mid-low range and core sustain. The mahogany neck and rosewood fingerboard combine to enhance the warm tone and produce a well-balanced sound that can be used in a wide range of genres.
The high degree of perfection that can only be achieved by Japanese manufacturing and the stability that can be trusted for both live and recording use make this one of the most attractive guitars.
There are some minor scratches and dull parts, but it is in relatively clean condition.
The frets have been worn out due to dents in the fretboard.
The neck is in good playing condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 221218-02
Country of manufacture: Japan
Case: Original hard case
Weight: 3.78kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 23.6mm
SCALE: 624mm (24.56")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 221218-02

Country of manufacture Japan

CaseGenuine hard case

Weight 3.78kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

No fret remainder problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.9mm

Neck thickness near 1st fret 20.9mm

Neck thickness near 12th fret 23.6mm

Scale 624mm (24.56")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment