USED Fender Mexico / Player Telecaster Maple Fingerboard Tidepool [11]

Telecaster from the "Player" series made in Mexico.
The fresh Tidepool finish is impressive.
The predecessor of the current "Player II" series, this model combines traditional looks with modern playability.
It features an alder body with a maple neck and maple fingerboard, and is equipped with two Player Series Alnico V single coils.
While centered on the classic Tele sound, the six-saddle bridge provides precise octave adjustment and stable tuning.
The modern C-shaped neck and 9.5" radius fingerboard also provide a contemporary playing feel.
There is a paint crack at the tip of the body cutaway on the back side. There is a paint crack at the neck joint.
There are dents on the head tip, neck, and fingerboard edge. Other than that, there are some scratches and dents, and the instrument shows signs of use.
The neck is in good playing condition with no noticeable abnormalities.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: MX22252306
Year of manufacture: 2022
Country of manufacture: Mexico
Case: Original soft case
Weight: 3.67kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.4mm
Neck thickness near 1st fret: 22.5mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modified: Nut groove corrected
Repair/Maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut groove correction

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number MX22252306

Year of manufacture 2022

Country of manufactureMexico

CaseOriginal soft case

Weight3.67kg

Truss rod no problem, rod is confirmed to be 60 degrees to the left and right, no problem

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.4mm

Neck thickness near 1st fret 22.5mm

Neck thickness near 12th fret 23.0mm

Scale 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Modified partNut groove correction

Repair/Maintenance partCleaning, string change, rod adjustment, octave adjustment, string height adjustment, nut groove correction