USED Tokai / LS-60 [11]

Tokai "Love Rock" series "LS-60" is in stock!
Judging from the serial number "0100874", this guitar was manufactured around 1980 in the "Love Rock" series.

Maple top/mahogany back construction with mahogany neck and rosewood fingerboard.
The traditional wood material and the set neck construction provide rich mid-low range and extended sustain.

Both pickups have been replaced with Seymour Duncan pickups.
(Front: APH1BL, Rear: model number unknown)

This is one of Tokai's most popular and cost-effective models.
There are scratches, dents, and peeling paint throughout.
The body and parts are tanned, and metal parts are rusted and dulled with age.
There are many scratches and scuffs on the back of the neck, and dents and chips on the head.
There are cracks at the neck joint, and the fingerboard and inlay have been repaired and glued in place.
Escutcheon, escutcheon screws, PU mounting screws, jack/jack plate, bridge studs replaced.

No noticeable abnormality on the neck, no problem in playing condition.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 0100874
Case: Non-authentic soft case
Weight: 3.94kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 21.3mm
Neck thickness near 12th fret: 23.8mm
SCALE: 624mm (24.56")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, and mortise and tenon adjustment
Other: --

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problems in normal use.

Serial number 0100874

Case: non-genuine soft case

Weight 3.94kg

No truss rod problem.

Fret remainder no problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.5mm

Neck thickness near the 1st fret: 21.3mm

Neck thickness near 12th fret 23.8mm

SCALE624mm (24.56")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, mortise and tenon

Other--