USED Epiphone / Rivoli Bass VC Sunburst [11]

This is a reissue model of the Epiphone Rivoli, a semi-acoustic bass from the 1960s, made in Korea.
This model was manufactured at the Korean factory in 1996.
It has a 30.5" short scale and features a unique tension feeling and high playability. The large humbucker mounted on the front produces a fat and sweet bass sound with a sense of air characteristic of semi-acoustic construction. A push-switch on the body activates the baritone (notch filter) function, which allows you to switch to a more open sound with the low frequencies cut off.
The bridge stud on the first string side has a slight lift, but this is caused by the string ground wire running through the bottom of the stud hole, and is not a problem in terms of use or durability.
There is a paint chip on the front left side of the body near the F hole.
There are also some scratches, dents, and rust on the metal.
The neck is slightly twisted with a forward warp on the 4th string side and a reverse warp on the 1st string side. There are no problems with normal use in its current setting.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: R96K 0341
Year of manufacture: 1996
Country of manufacture: Korea
Case: Original hard case
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.3mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.7mm
SCALE: 770mm (30.31")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL170S / .045-.100 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.