USED Fender Japan / TL72-65 Natural [11]

Vintage-like tone in your hand, a masterpiece of Japanese Telecaster
The Fender Japan TL72-65 is a Japanese-made Telecaster that faithfully reproduces the 1970s style. The body is made of Sen wood, which is lightweight but has a well-balanced sound with a good amount of midrange thickness. The neck is made of maple with 21 frets, and the vintage style is comfortable in the hand.
Two single coil pickups provide bright and clear highs, and the Senwood's unique midrange and low end are balanced. 3-saddle bridge construction provides vintage Telecaster tone and sustain. The natural finish beautifully shows off the grain of the wood and adds to its looks.

Made in Japan by Fujigen in the 1990s, the high quality is also attractive. This is one that can be used for a wide range of playing regardless of genre, and is recommended for those who want to experience a vintage-style Telecaster easily.
There are a few scratches that reach the wood near the jack.
There are also scratches, dents, and dull parts.
The frets have been worn out due to dents.
The neck is in good playing condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: N025919
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.36kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.7mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number N025919

Year of manufacture 1993-1994

Country of manufacture Japan

CaseNon-genuine soft case

Weight 3.36kg

No truss rod problem, rod is confirmed to be 60 degrees to the left and right.

No fret remainder problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.6mm

Neck thickness near the 1st fret: 21.7mm

Neck thickness near 12th fret 23.2mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment