USED Ibanez / AR250 Honey Sunburst [11]

Ibanez "Artist" series "AR250" is now in stock!
Flame maple top/mahogany body, set maple neck, rosewood fingerboard.
The body, neck, and head have cream-colored binding for a luxurious look!
Pickups have been replaced with Gibson USA pickups.
The controls are the standard 2 volume / 2 tone / 3 pickup selector, allowing you to enjoy a wide range of sound creation.
There are many signs of use such as scratches, dents, and cracks in the paint.
Metal parts are rusted and dulled with age.
There are several dents and paint cracks on the side of the body.
There is a paint chip on the tip of the head where the wood is visible.
The neck is in good playing condition with no noticeable damage.

Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: C02124617
Country of manufacture: Korea
Case: Non-authentic soft case
Weight: 3.17kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.2mm
SCALE: 628mm (24.75")
RADIUS: 356mm (14")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number C02124617

Country of manufacture Korea

CaseNon-genuine soft case

Weight 3.17kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, fret height is high enough

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness near 1st fret 20.0mm

Neck thickness near 12th fret 22.2mm

Scale 628mm (24.75")

RADIUS356mm (14")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment