USED Greco / SE600 Natural [11]

The Greco SE600 evokes the early days of Japanese Stratocaster copies in the early 1970s.
Featuring a curved Greco logo, no serial number, and a neck plate stamped with "MATSUMOKU," this guitar is packed with transitional details typical of early models.
The large-headstock design and natural finish give it a rugged presence typical of the era. While the grain is relatively subtle, the weight and specifications suggest a body made from a type of cypress wood.
It is equipped with Maxon single-coil pickups. Its appeal lies in the wide dynamic range and mellow tone characteristic of vintage Japanese guitars, resulting in a sound that combines brilliance with a rich, full-bodied depth.

This is a guitar that lets you fully appreciate the raw yet rich character of “early Japanese vintage” models, distinct from the more refined Super Real era that followed.
Tremolo arm is missing.
There is paint discoloration from a sticker on the body top. Metal parts, such as the joint plate, show signs of deterioration and rust.
There is some paint reaction at the tip of the headstock, and the gloss has faded slightly.
The engraving on the knobs is fading. Additionally, the pots exhibit slight rotational resistance due to age, but this does not affect playability.
Otherwise, there are some minor scratches and dents, but no particularly noticeable damage.
The neck has a slight waviness due to the truss rod being fully loosened. The frets are slightly low, making them difficult to level; therefore, it is currently set to a higher standard, and there are no issues with playability.
Condition Grade: B+: Some minor scratches, but no issues for normal use

Country of Manufacture: Japan
Case: Non-original soft case
Accessories: Wrench, spare spring, bridge cover * Tremolo arm missing
Weight: 4.61 kg
Truss Rod: Note: The truss rod is completely loose; currently, there are no issues with the neck
Fret life: Note: Frets are on the low side but can still withstand filing
String height (low string side): 2.4 mm at the 12th fret
String height (treble side): 1.7 mm at the 12th fret
Nut width: 41.0 mm
Neck thickness near the 1st fret: 21.6 mm
Neck thickness near the 12th fret: 23.6 mm
Scale: 648mm (25.5")
Radius: 241mm (9.5")
Strings at setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, electronics repair

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This is a one-of-a-kind item currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to remove product listings promptly upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.