USED Fender USA / American Standard Telecaster Vintage White [11]

A Fender USA American Standard Telecaster manufactured in the mid-1990s.
Featuring a Vintage White finish paired with a maple fingerboard, this guitar embodies the classic Telecaster style.

In addition to the well-balanced tone produced by its alder body and maple neck, it features single-coil pickups exclusive to the American Standard series. With crisp highs and a full-bodied mid-to-low range characteristic of the Telecaster, this highly versatile model is suitable for a wide range of playing styles, from rhythm to lead.

It also features specifications unique to the American Standard series—such as a 9.5-inch radius fingerboard, medium-jumbo frets, and a 6-saddle bridge—which blend vintage styling with modern playability. This guitar exemplifies the high level of craftsmanship typical of 1990s USA-made Fender instruments.
Peeling paint was observed on the 6th string side between the 19th and 20th frets, so the area has been repaired with adhesive. There is a slight bulge on the fingerboard surface around the repair area, and the position marks have faded.
The set screws on the 2nd and 6th string saddles, which had become seized due to deterioration, have been replaced.
The saddles have been replaced with lock pins, and the strap-side parts are missing.

There is a distinctive odor from long-term storage, likely caused by the included case.
There are several small and large chips in the clear finish on the edge of the fingerboard near the 1st string. There are no snags that would interfere with playing.
There are sticker marks on the back of the body.
Overall, there are many fine scratches; while there are few large, conspicuous scratches on the body, it shows signs of wear appropriate for its age.
There are no noticeable abnormalities on the neck, and it is in good playing condition.
Condition Grade: B+: Some scratches are present, but the instrument is suitable for normal use.

Serial Number: N525627
Year of Manufacture: 1995–1996
Country of Manufacture: USA
Case: Genuine hard case
Accessories: * Lock pin missing
Weight: 3.86 kg
Truss Rod: No issues; rod movement confirmed up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 43.0 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 22.0 mm
Scale: 648 mm (25.5")
RADIUS: 254 mm (10")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and dressing

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret life, string height, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.