USED Guild / G-37 BLD, made in 1979 [12]

Vintage Guild with arch back specification is in stock.
This is a late model made in 1979, after specification change. The neck has been changed to maple, and it produces a solid sound with a solid core. The archback is made of maple, and even though it is plywood, it gives a full and punchy impression, and its powerful and tight sound is a specialty of 70s guilds. This is a great chance to get a 70s US-made guitar with vintage style and sound for under 200,000 yen. This is a great opportunity to get one for your first vintage guitar.

The guitar is in excellent condition with a few scratches on the top of the head, dents and weather checks on the back of the neck and body, and a ding on the lower bout on the top 6 string side of the body. The sides and back have some dents and scratches, but considering that the instrument was manufactured approximately 45 years ago, it seems to be in relatively clean condition. The overall condition of the instrument has some signs of use, but it has been fully maintained since it arrived at our store, so you can use it with peace of mind.

Product Rank: B: Fairly scratched and used, but no problem in normal use.

Serial number: 197119
Year of manufacture: 1979
Country of manufacture: USA
Case: Original hard case
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Remaining: Still good for cutting, but low frets.
String height on bass side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 43.5mm
Neck thickness near 1st fret: 21.0mm
SCALE: 650mm (25.5")
RADIUS: 356mm (14")
Strings in setup: D'Addario EJ-16 / .012-.053 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, mortise and tenon adjustment, bridge lift correction, saddle modification

Specs

Item Rank
B: Fairly scratched and used, but no problem for normal use.

12 months old

Serial No.
197119

Year of manufacture
1979

Country of manufacture
U.S.A.

Case
Genuine hard case

Truss Rod
No problem, rod is confirmed to 60 degrees left and right.

Fret Remaining
Still can withstand cutting, but the frets are low.

String Height Low String Side
2.5mm above 12th fret

High string on treble string side
2.0mm above the 12th fret

Nut width
43.5mm

Neck thickness near 1st fret
21.0mm

Scale
650mm (25.5")

RADIUS
356mm (14")

Strings for setup
D'Addario EJ-16 / .012-.053 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, nut replacement, mortise and tenon adjustment, bridge lift correction, saddle modification