USED Fender USA / American Vintage 62 Jazz Bass 3Knobs 3-Color Sunburst [12]

This model is a faithful reproduction of the '62 style of Fender's iconic electric bass.
It is also a template for the jazz bass series. It has an alder body, maple neck, slab-lined rosewood fingerboard, dot position marks, reverse-wound pegs, and lacquer finish specifications.
Bridge cover and bridge mute parts are included to customize it to more vintage specifications.
There is paint peeling on the horn tip of the 1st string side, and paint chips are scattered on the neck side of the 6th string side, body top and back, and neck joint.
There is a slight roughness on the neck grip due to lacquer deterioration, but it does not affect the playing.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: V191600
Year of manufacture: 2010
Country of manufacture: USA
Case: Original hard case
Accessories: Bridge cover, bridge mute
Weight: 4.11kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard height is high enough.
String height on bass string: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 38.8mm
Neck thickness near 1st fret: 20.7mm
Neck thickness near 12th fret: 24.4mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
V191600

Year of manufacture
2010

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Bridge cover, bridge mute

Weight
4.11kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
38.8mm

Neck thickness near 1st fret
20.7mm

Neck thickness near 12th fret
24.4mm

Scale
864mm (34")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment